联系我们
  • 青岛欣大荣数控机器有限公司
  • 地址:青岛市城阳区仙山东路北
  • 电话:13791821849
  • 手机:13791821849
  • 联系人:唐经理
产品知识首页 - 产品知识

定制家具生产线讲解数控木工雕刻机的维护常识有哪些?

作者:青岛欣大荣数控机器有限公司 来源:http://www.qddrsk.com/ 发布时间:2015-9-11 11:52:22

定制家具生产线讲解数控木工雕刻机的维护常识有哪些?
Custom furniture production line to explain the maintenance of CNC woodworking engraving machine to maintain common sense what?
1.雕刻机连续运行时间每天10小时以下,保证冷却水的清洁及水泵的正常工作,绝不可使水冷主轴电机出现缺水现象,定时更换冷却水,以防止水温过高。
1 engraving machine continuous running time of 10 hours per day, to ensure the cooling water and the normal work of the water pump, must not make water cooling spindle motor phenomenon, the timing of the replacement of cooling water to prevent water temperature is too high.
2、雕刻机每次机器使用完毕,要注意清理,务必将平台及传动系统上的粉尘清理干净,定期(每周)对传动系统(X.Y.Z三轴)润滑加油。
2, engraving machine each machine use, must pay attention to clean, must the platform and the transmission system on the dust clean, regular (weekly) on the transmission system (X.Y.Z three axis) lubrication oil.
3、雕刻机机器若长期不用,应定期(每周)加油空走,以保证传动系统的灵活性。
3, engraving machine if not long time, should be regular (weekly) gas to go, in order to ensure the flexibility of the transmission system.
4、雕刻机定期(依使用情况)清理电器箱内灰尘,检查接线端子螺丝是否松动,以保证电路安全、可靠使用。
4, engraving machine on a regular basis (in accordance with the use of the case) to clean up the dust in the electrical box, check the wiring terminal screws are loose, in order to ensure the safe and reliable use of the circuit.
5、雕刻机定期(依使用情况)检查机器各部件螺钉是否松动,

5, engraving machine on a regular basis (in accordance with the use of the case) to check whether the machine screws are loose,

更多关于板式家具生产线,数控排钻等新闻资讯敬请关注青岛欣大荣数控机器有限公司(www.qddrsk.com).

鲁公网安备 37021402000783号



销售一部


售后支持
售后支持